What is the Aerial & Scissor Lift Competent Person course?

A competent person-level safety program covering OSHA 29 CFR 1926.453 and ANSI A92 standards with instruction on the competent person's role, hazard identification, fall protection, equipment inspection, emergency response, and safety plan development.

What topics are covered in the Aerial & Scissor Lift Competent Person course?

Coverage includes competent person roles and regulatory responsibilities, OSHA and ANSI standards, hazard identification, fall protection and PPE selection, equipment operation and maintenance, emergency response and rescue planning, and developing site-specific safety plans.

How long does the course take to complete?

Approximately 3–4 hours total. Self-paced completion typically occurs within 1–2 weeks, with 6 months from enrollment to finish all coursework.

Who is required to take this course?

Supervisors, safety officers, and experienced operators designated as the competent person at job sites using aerial and scissor lifts.

What is a competent person for aerial and scissor lifts?

Someone who identifies hazards and possesses authority to take corrective action, responsible for equipment inspection, worker training, monitoring conditions, and enforcing fall protection.

What is the difference between the awareness course and the competent person course?

The awareness course covers basic hazard recognition for general operators; the competent person course provides in-depth instruction on inspection, ANSI standards, emergency planning, and authority to stop unsafe work.

Does my competent person certificate expire?

No federal expiration mandate exists, though retraining is required when workplace conditions change, new equipment arrives, or understanding proves inadequate.

Can I take this course on my phone?

Yes. The course works on desktop, tablet, and smartphone with automatic progress saving on the same device.

What is the passing score?

A minimum score of 70% on the final exam is required; retakes are permitted.

Aerial & Scissor Lift Competent Person

Q: Is eTraining's online course valid and accepted?

Yes. The course meets OSHA 29 CFR 1926.453 and ANSI A92 standards and is accepted nationwide across all 50 U.S. states.

Featured Courses

2026 8 Hour HAZWOPER Refresher

This convenient Hazwoper Refresher Course is updated annually to reflect any changes in regulation and...

Lithium Battery Safety

Fires. Explosions. Environmental cleanups. Lithium battery failures are dangerous but often preventable. This new online...

View All OSHA Courses

Course Information

Everything You Need to Know
About This Course

Course Details at a Glance

Key facts before you enroll.

Who Should Take This Course?

Find out if this training applies to you.

Industries That Require This Training

See which sectors depend on this training.

What's Included

Everything that comes with your enrollment.

Try It Free

5-minute interactive course preview.

Course Overview

Watch a 90-second overview of the Aerial & Scissor Lift Competent Person — no login required.

Course overview video not available.

Enroll Now — $89.00

Try It Free — 5-Minute Interactive Preview

Experience the first 5 minutes of the course right here. No account or payment required.

Interactive Course Preview

5-minute preview of Module 1 — Aerial & Scissor Lift Competent Person
No login or payment required

Enroll Now — $89.00

What You Get When You Enroll

Everything included with your Aerial & Scissor Lift Competent Person training.

✓Instant certificate of completionPrintable PDF, ready immediately after passing
✓Mobile-friendly platformTrain on desktop, tablet, or smartphone
✓Progress saved automaticallyStop and restart without losing your place
✓30-day satisfaction guaranteeFull refund if you're not satisfied

Enroll Now — $89.00

Course Details at a Glance

Everything you need to know before enrolling in the Aerial & Scissor Lift Competent Person.

Detail

Information

OSHA Standard

29 CFR 1926.453 and ANSI A92

Course Duration

1.5 hours

Format

100% online, fully narrated with photos and interactivity

Passing Score

70% on final exam

Certificate

Personalized certificate, printable immediately upon passing

Languages

English and Spanish

Device Compatibility

Desktop, tablet, and smartphone

Accepted

Our courses meet federal standards, but state requirements may vary. Please verify before purchase.

Enroll Now — $89.00

Who Should Take the Aerial & Scissor Lift Competent Person?

Find out if this training applies to your role, your job site, or your employer's compliance requirements, and whether it matches the certification you need.

✓Workers designated as the competent person for aerial and scissor lift operations
✓Construction site supervisors and foremen overseeing aerial lift work
✓Safety officers responsible for aerial and scissor lift compliance
✓Equipment operators seeking advanced competent person-level certification
✓Project managers overseeing work at height involving aerial platforms
✓Maintenance and facility managers who supervise scissor lift operations
✓Employers and contractors who need to designate a qualified competent person on site
✓Workers seeking career advancement through competent person certification

Enroll Now — $89.00

Industries That Require Aerial & Scissor Lift Competent Person

Employers across a wide range of industries use this course to meet federal, state, and site-specific safety training requirements for their workforce.

✓Commercial and residential construction
✓Industrial maintenance and facility management
✓Warehouse and distribution center operations
✓Telecommunications tower and infrastructure work
✓Power line and utility installation and maintenance
✓Building renovation and exterior maintenance
✓Event staging, entertainment, and venue setup
✓Manufacturing plant maintenance and equipment installation
✓Government and municipal building operations
✓Painting, signage, and exterior finishing contractors

Enroll Now — $89.00

Why eTraining

Better Training.
Better Outcomes.

Over 50,000 workers trained. Here's what makes us the trusted choice for OSHA compliance.

OSHA Citation Printed on Every Certificate

Every certificate shows OSHA citation — so your employer and site safety officer can verify compliance at a glance.

No Setup. No LMS. Train in Minutes.

Pay once, get instant access — no account setup, no app downloads, no IT required. Works on any browser.

Built for Field Workers, Not Classrooms

Content is grounded in real hazardous waste site operations — not recycled classroom slides. Scenarios reflect the work your crew actually does.

Trusted by Safety Managers & Contractors

Used by EHS managers, general contractors, and federal site supervisors to keep crews certified on time, every year.

Instant PDF

Print-Ready

Shareable

Frequently Asked Questions

Everything you need to know about the Aerial & Scissor Lift Competent Person.

he Aerial & Scissor Lift Competent Person course is a competent person-level safety training program that covers OSHA 29 CFR 1926.453 and ANSI A92 standards. It provides approximately 3–4 hours of instruction on the competent person’s role and responsibilities, hazard identification, fall protection, equipment inspection, emergency response, and safety plan development for aerial and scissor lift operations. Upon completion, participants receive a printable certificate of completion.

The course covers: the competent person’s role and regulatory responsibilities; OSHA 29 CFR 1926.453 and ANSI A92 standards; common aerial and scissor lift hazards and accident causes; hazard identification and site-specific risk assessment; fall protection requirements and PPE selection and inspection; equipment operation, inspection, and maintenance; emergency response and rescue planning, including emergency descent protocols; and developing and enforcing a site-specific aerial and scissor lift safety plan. The course is divided into 3 modules with quizzes throughout.

The course takes approximately 3–4 hours to complete. Because it is self-paced, you can complete it over multiple sessions at your convenience. Most students finish within 1 to 2 weeks. You have 6 months from your enrollment date to complete all coursework. Progress is saved automatically on the same device, so you can stop and resume at any time.

OSHA requires that a competent person be designated at every job site where aerial and scissor lifts are used. This course is designed for individuals who will serve in that role, including supervisors, safety officers, and experienced operators. Employers are responsible for ensuring a competent person is present during aerial and scissor lift operations. General operators may take the separate awareness-level course instead.

Under OSHA regulations, a competent person is someone who can identify existing and predictable hazards in the working environment and has the authority to take prompt corrective action to eliminate them. For aerial and scissor lift operations, the competent person is responsible for inspecting equipment before use, ensuring workers are properly trained, monitoring site conditions, enforcing fall protection requirements, and stopping work when unsafe conditions are identified.

The Aerial & Scissor Lift Safety awareness course is designed for general operators and workers who use aerial and scissor lifts on the job. It covers basic hazard recognition and safe operating practices. The Competent Person course is a more in-depth program designed for individuals who will be designated as the competent person on site, covering detailed inspection procedures, ANSI standards, emergency response planning, risk assessment, and the authority and responsibility to stop unsafe work.

There is no federally mandated expiration date for aerial and scissor lift competent person training certificates. However, OSHA requires retraining when workplace conditions change, when new equipment is introduced, or when the competent person demonstrates inadequate understanding of hazards. Refresher training is recommended to stay current with evolving OSHA and ANSI standards.

Yes. The course works on desktop computers, laptops, tablets, and smartphones. Your progress is saved automatically on the same device you are using, allowing you to pause and pick up where you left off. Note: you must continue on the same device to retain your saved progress.

Yes. eTraining’s Aerial & Scissor Lift Competent Person course covers OSHA 29 CFR 1926.453 and ANSI A92 standards and is accepted nationwide. You receive a printable certificate of completion that documents your competent person training. Employers across all 50 U.S. states accept this training for competent person designation on job sites.

You must score at least 70% on the final exam to pass and receive your certificate of completion. The course includes knowledge-check quizzes throughout to help prepare you for the final exam. If you do not pass on your first attempt, you can retake the exam.